KW Clubsport Coilovers bring motorsport technology to the street!
KW Clubsport suspension allows you to realise the full potential of your car on track days - they provide the ability to adjust to different track surfaces, sharp turns and abrupt elevation changes.
As a supporting suspension manufacturer to numerous different racing series, KW has claimed 6 ADAC Zurich 24-hour victories within 10 years at the famous Nürburgring circuit and the ADAC GT Masters 2011 Championship. More then 70 race teams are equipped with KW coilover systems in the VLN Endurance Championship series. These race teams rely on KW's racing expertise and experience for their vehicle setup. All of this invaluable knowledge is used in the development of the KW Clubsport coilover systems.
Using the Nordschleife as it's testing ground, KW developed its 3-Way Clubsport coilover kit. Wheel loads, vehicle weight and chassis reinforcements (increased body stiffness) can all be taken into consideration with adjustment capabilities of the 3-Way Clubsport. Similar to KW Competition Coilovers, low-speed and high-speed compression adjustment is done via KW's patented two-valve control on the reservoir.
By hand, you can vary the low-speed compression damping with six precise clicks at the purple adjustment wheel. The gold adjustment wheel allows the user to change the high-speed compression damping with 14 precise clicks. Rebound adjust is provided with 16 adjustable clicks providing a noticeable change the rebound adjustment setting. A reduction in rebound forces provides a more comfortable ride quality suitable for driving on the road.
- 16 precise clicks in rebound adjustment dampening
- Adjustable compression damping with 6 clicks in low-speed range and 14 precise clicks in the high-speed range
- Continuous lowering
- Tested adjustment range
- High-quality components for long-term durability
- Independent damping force adjustability with aluminium spherical bearing top mounts available
Lowering
This coilover kit will lower your vehicle 15 to 40mm at the front, and 15 to 40mm at the rear.
Compatible Vehicles
The part is compatible with the following versions of the BMW 4 Coupe (F32, F82) (from 2013 onwards):
- M4 - 3L Petrol 6cyl, 425hp, RWD Coupe
- M4 CS - 3L Petrol 6cyl, 453hp, RWD Coupe
- M4 Competition - 3L Petrol 6cyl, 444hp, RWD Coupe
Check Your VIN Plate
Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.
On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 990kg, and the rear axle load rating must be no more than 1170kg.
For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.
Documentation
The following documentation (fitting or adjustment instructions) is available for this product:
Tailor made for your car, this KW V4 Clubsport Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.