V2 Comfort Coilovers from KW's Street Comfort suspension range is the perfect solution if you want the look and flexibility of adjustable coilover suspension, without sacrificing driver comfort. It combines a minimal lowering within the vehicle-specific adjustment range of 10 to 40 mm with a comfort-oriented damper setup developed from KW test engineers in numerous test runs in everyday life and on KW's 7-post rig.
Whether on long trips on the motorway or country roads, with KW Street Comfort coilovers you can be comfortable. The shorter KW damper housings enable a comfortable setup despite the lowering. The KW Street Comfort coilovers include comfort-oriented damping and spring characteristics which are perfectly adjusted to each other. Additionally, the KW Street Comfort coilovers allow you to individually adjust the rebound damping to suit your driving style and your personal sense of comfort.
With KW Street Comfort coilovers you can influence the handling and comfort by the individually adjustable rebound damping. With 16 precise clicks, you can adjust the KW dampers to a be more comfortable or a little firmer without affecting the compression damping. By increasing the rebound force with the adjustment wheel, the body movements are reduced, and your vehicle has more directional and cornering stability. If you change to bigger wheels and tyres then you can adapt the rebound damping to the driving behaviour of your car and your new alloy wheels perfectly. Or if you reduce the rebound forces with a few clicks you can gain even more comfort.
The KW Street Comfort coilovers use stainless steel "inox-line" technology, enabling a vehicle-specific lowering within the tested adjustment range of 10 to 40 mm. So you do not have to accept the fixed lowering of a conventional spring kit any more. Due to the delicate processing and use of high quality components, the stainless steel KW Street Comfort coilover struts are 100 per cent corrosion-resistant and have an unlimited life. The functioning of the lowering in connection with the dirt resistant trapezoid thread and the composite collar will not be affected even after many years of driving.
- Stainless steel technology "inox-line"
- Tested adjustment range
- High quality components for a long life
- Comfort-oriented damper setup
- Adjustable rebound damping
Lowering
This coilover kit will lower your vehicle 10 to 40mm at the front, and 5 to 35mm at the rear.
Compatible Vehicles
The part is compatible with the following versions of the Volkswagen GOLF VI (5K1) (from 2008 to 2014):
- 2.0 TFSI 4motion - 2L Petrol 4cyl, 256hp, 4WD Hatchback
Check Your VIN Plate
Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.
On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1105kg, and the rear axle load rating must be no more than 1150kg.
For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.
Documentation
The following documentation (fitting or adjustment instructions) is available for this product:
Tailor made for your car, this KW V2 Comfort Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.
Fitting Centre Locator
01582 787377
