KW V2 Coilover Kit to fit Peugeot RCZ (from 2010 to 2015)


Part Number: 15270019
Quick Code: P445251

View delivery information
Click here to ask a question


KW Variant 2 Coilover Kits

KW Inox Variant 2 Coilover Kits provide sporty handling with adjustable rebound damping. It is intended for the experienced driver who does not only wish to determine the individual lowering of his vehicle, but also wishes to carry out setup adjustments. The adjustable rebound damper allows you to adjust the pitch and roll behaviour of the vehicle and therefore driving pleasure can be adapted to your own requirements.

As with all KW coilovers their engineers develop vehicle specific damper settings which undergo comprehensive test cycles at the Nürburgring and on KW’s 7-post driving dynamic centre. With a KW coilover kit the driving experience is more dynamic and direct; and with the rebound adjustability of KW Variant 2 coilovers you can have even more influence over the handling and comfort of the car. With 16 precise click you can adjust the KW dampers (from firmer to more comfortable).

The rebound valves of the KW twin-tube dampers are either adjusted at the upper end of the piston rod with an integrated adjustment wheel or a twist-adjuster (that will be included with the kit). By increasing the rebound force the body movements are reduced; your car will stay in line and you will have more stability at increased corner speed.

A KW Variant 2 Coilover Kit is also the perfect choice for someone looking to put larger wheels and tyres on their vehicle. With a KW Coilover Variant 2 Coilover Kit you will be able to adjust the car's handling so that it works perfectly with your larger wheels.

At KW’s headquarters in Fichtenberg each KW Coilover Variant 2 kit is subject to extensive stress tests during production to meet the high standards of KW’s quality management. Every single damper and suspension kit is tested thoroughly. Each kit includes a 2 year warranty. KW coilover struts are 100% rust-free and have an unlimited lifetime under all weather conditions - all parts are designed for long term use.

  • Rebound adjustable damper technology with 16 precise clicks
  • Stainless steel technology "inox-line"
  • Adjustment parameters approved by the German Technical Control Board (TÜV)
  • Ready to install, complete solution
  • High quality components for a long life
  • Complete documentation for an easy installation


This coilover kit will lower your vehicle 25 to 45mm at the front, and 15 to 40mm at the rear.

Compatible Vehicles

The part is compatible with the following versions of the Peugeot RCZ (from 2010 to 2015):

  • 1.6 16V - 1.6L Petrol 4cyl, 154hp, FWD Coupe
  • 1.6 16V - 1.6L Petrol 4cyl, 162hp, FWD Coupe
  • 1.6 16V - 1.6L Petrol 4cyl, 197hp, FWD Coupe
  • 1.6 16V - 1.6L Petrol 4cyl, 201hp, FWD Coupe
  • 1.6 THP 150 - 1.6L Petrol 4cyl, 148hp, FWD Coupe
  • 1.6 THP 270 - 1.6L Petrol 4cyl, 267hp, FWD Coupe
  • 2.0 HDi - 2L Diesel 4cyl, 161hp, FWD Coupe

An example VIN plate

Check Your VIN Plate

Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.

On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1100kg, and the rear axle load rating must be no more than 850kg.

For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.


The following documentation (fitting or adjustment instructions) is available for this product:

Tailor made for your car, this KW V2 Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.

Estimated by Tue 28th May 2024

Deliveries are made Monday to Friday and exclude weekends and public holidays.

We have an order cut-off time of 1PM on the days that we are open. Our estimated delivery date takes this into account.

If it is available, we will provide tracking information by email.

Select Your Location:
Delivery Cost:

UK Mainland excludes all islands and postcode areas IV, KW, PH, FK17-21, PA21-78

If you are ordering multiple items your total postage charge will be reduced. Please check your basket for the total cost.

  • Engines: 1.6 THP 150, 1.6 16V, 2.0 HDi, 1.6 THP 270
  • Front lowering: 25-45mm
  • Rear lowering: 15-40mm
  • Front Axle Load Rating: up to 1100kg
  • Rear Axle Load Rating: up to 850kg
Carnoisseur Staff

Trading For Over 40 Years

  • Family owned and operated since 1979
  • Just ask our customers - we are rated EXCELLENT on Trustpilot
  • Safe, secure and easy ordering, online or by calling 01582 787377

Carnoisseur Price Match Promise

The Very Best Prices

Fitting Centre

Fitting Service