KW V1 Coilover Kit to fit Peugeot 307 SW (3H) (from 2002 to 2009)

£1,153.00

Part Number: 10270008
Quick Code: P445244

View delivery information
Click here to ask a question

KW

KW Variant 1 Coilover Kits

The KW Variant 1 Coilover Kit is KW’s entry level model for more driving pleasure and fully adjustable lowering.

With the KW Coilover Variant 1 you can achieve maximum lowering within the tested adjustment range. Depending on the vehicle model this varies from between 30 to 70mm and 50 to 90mm. Even after years of use you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is easily changed using our one piece composite height adjuster, on the rear axle this is the same unless the car has a separate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

KW Variant 1 Coilovers satisfy the performance enthusiast with a sporty basic setup. KW engineers have developed a specific damper setup and spring rate for each vehicle, to increase the driving pleasure with optimal balance of sportiness and practicality. With KW Variant 1 Coilovers the rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

KW are a true market leader, creating innovative suspension solutions for road and racetrack for over 15 years. No matter where in the world, drivers, automotive manufacturers and tuners rely on KW Coilovers. Each KW coilover kit is subject to extensive stress tests during production to meet the high standards of quality. Each kit includes a 2-year warranty.

  • Optimally pre-adjusted
  • Sporty and comfortable dampening technology
  • Stainless steel technology "inox-line"
  • Individually height adjustable
  • Lowering range approved by the German Technical Control Board (TÜV)
  • Ready to install, complete solution
  • High quality components for a long durability
  • Complete documentation for an easy installation

Lowering

This coilover kit will lower your vehicle 30 to 70mm at the front, and 25 to 55mm at the rear.


Compatible Vehicles

The part is compatible with the following versions of the Peugeot 307 SW (3H) (from 2002 to 2009):

  • 1.4 - 1.4L Petrol 4cyl, 74hp, FWD Estate
  • 1.4 16V - 1.4L Petrol 4cyl, 87hp, FWD Estate
  • 1.4 HDi 70 - 1.4L Diesel 4cyl, 67hp, FWD Estate
  • 1.6 16V - 1.6L Petrol 4cyl, 107hp, FWD Estate
  • 1.6 HDI 110 - 1.6L Diesel 4cyl, 107hp, FWD Estate
  • 1.6 HDI 90 - 1.6L Diesel 4cyl, 89hp, FWD Estate
  • 2.0 16V - 2L Petrol 4cyl, 134hp, FWD Estate
  • 2.0 16V - 2L Petrol 4cyl, 138hp, FWD Estate
  • 2.0 16V - 2L Petrol 4cyl, 141hp, FWD Estate
  • 2.0 HDI 110 - 2L Diesel 4cyl, 106hp, FWD Estate
  • 2.0 HDI 90 - 2L Diesel 4cyl, 89hp, FWD Estate
  • 2.0 HDi 135 - 2L Diesel 4cyl, 134hp, FWD Estate

An example VIN plate

Check Your VIN Plate

Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.

On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1100kg, and the rear axle load rating must be no more than 1065kg.

For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.


Documentation

The following documentation (fitting or adjustment instructions) is available for this product:


Tailor made for your car, this KW V1 Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.

Delivery:
Estimated by Tue 28th May 2024

Deliveries are made Monday to Friday and exclude weekends and public holidays.

We have an order cut-off time of 1PM on the days that we are open. Our estimated delivery date takes this into account.

If it is available, we will provide tracking information by email.


Select Your Location:
Delivery Cost:

UK Mainland excludes all islands and postcode areas IV, KW, PH, FK17-21, PA21-78

If you are ordering multiple items your total postage charge will be reduced. Please check your basket for the total cost.

  • Engines: 2.0 16V, 1.6 16V, 2.0 HDI 90, 2.0 HDI 110, 1.4 16V, 1.6 HDI 110, 2.0 HDi 135, 1.4, 1.6 HDI 90, 1.4 HDi 70
  • Front lowering: 30-70mm
  • Rear lowering: 25-55mm
  • Front Axle Load Rating: up to 1100kg
  • Rear Axle Load Rating: up to 1065kg
Carnoisseur Staff

Trading For Over 40 Years

  • Family owned and operated since 1979
  • Just ask our customers - we are rated EXCELLENT on Trustpilot
  • Safe, secure and easy ordering, online or by calling 01582 787377



Carnoisseur Price Match Promise

The Very Best Prices




Fitting Centre

Fitting Service