The Plug & Play solution of the KW DDC (Dynamic Damping Control) coilover kit was developed for cars that have standard Electronic Damper Control. The standard dampers can easily be replaced by the KW DDC coilover kit. The existing control unit and the interior switch that was installed for the operation of the original damper control will be kept. For the first time the KW DDC coilover kit combines the advantages of a KW coilover kit and the convenience of standard damper control. By pushing the original button, the driver can choose between vehicle-specific damper setups such as comfort, normal and sport.
This KW kit also allows for lowering between the TÜV certificated adjusting range, and the stainless steel technology "inox-line" guarantees that all parts remain movable, even under heavy use and winter weather conditions
- The Plug & Play solution for increased handling or more comfort
- Compatible with the factory OEM suspension control
- Vehicle-specific damper setups such as Comfort / Normal / Sport
- Operation via factory interior controls
Lowering
This coilover kit will lower your vehicle 20 to 40mm at the front, and 15 to 40mm at the rear.
Compatible Vehicles
The part is compatible with the following versions of the Audi Q3 Sportback (F3N) (from 2019 onwards):
- 2.5 RS quattro - 2.5L Petrol 5cyl, 394hp, 4WD SUV
Check Your VIN Plate
Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.
On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1240kg, and the rear axle load rating must be no more than 1400kg.
For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.
Documentation
The following documentation (fitting or adjustment instructions) is available for this product:
Tailor made for your car, this KW DDC - Plug & Play Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.
Fitting Centre Locator
01582 787377
