These are brand new FIA approved harnesses with 2024 homologation, and are labelled accordingly.
Top of the range 50mm HANS/FHR Only, FIA 8853:2016 approved single seater harness.
It has smooth running alloy adjusters with bolt-in fixing plates on the shoulders and bolt-in pinch plates on the lap and crutch straps. The upper shoulder measurement from the fixing on the chassis to the adjuster on the driver's chest is 41cm. If you require a different length shoulder strap please contact us.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the crutch strap on 6 point harnesses. Innovative features such as a securing tab for intercom cables on the shoulder strap and thumb loops on lower shoulder straps were all pioneered by TRS and are standard on all of their competition harnesses.
A variety of attachment points are available on request – please see the attached spec sheet detailing the options.
Key Features
Details of the key features of this harness are shown below. If need help deciding which harness is for you, please have a look at our TRS Harness Comparison Table.
- 6 bolt-in fixing points
- FIA Homologation 8853:2016
- Suits single seater
- 75mm (3") lower to 50mm (2") upper shoulder straps (upper shoulder length 41cm)
- 50mm (2") lap straps
- 50mm (2") crutch straps
- Shoulder straps are approximately 41cm (approx. 16.1") from the adjuster to the fixing point
- For use only with HANS/FHR device
- Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
- Alloy adjusters on shoulders
- Rotary quick release buckle
- Securing tab for intercom cables on the shoulder strap
- Thumb loop on lower shoulder straps
- Pinch plate (8.8mm diameter bolt holes) fixings on lap straps
- Made in England
Options
- Colour - 9 colours are available, check the images to see the different options
- Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
- Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind
Adjuster Upgrades
You can upgrade the harnesses to the Ultralite version. As standard TRS superlite harnesses use steel anti-creep adjusters on the lap straps. The shoulder straps use premium aluminium adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Ultralite harnesses use the premium adjusters on both the shoulder and lap straps.
They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.
Standard Steel Adjusters
50mm (2") steel adjusters
75mm (3") steel adjusters
Premium Alloy Adjusters
50mm (2") alloy adjusters
75mm (3") alloy adjusters
Bespoke Harness Options
Do you require bespoke options? CLICK HERE to download our Harness Spec Sheet. You can complete this and email it to us for a quote, or just give us a call.
Optional Extras
TRS Shoulder Pads
TRS Webbing Cutter
With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.
A pair of TRS Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.
Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.
CLICK HERE to download the fitting instructions for this TRS Harness.
This TRS Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.