These are brand new FIA approved harnesses with 2024 homologation, and are labelled accordingly.
Top of the range 6 point 50mm (2") shoulder and 50mm Quick Adjuster lap, FIA approved 8853:2016 HANS/FHR only saloon harness.
This harness is for drivers who prefer to use 50mm (2") webbing where it passes over the HANS/FHR device. It features smooth running professional alloy adjusters on the shoulder straps and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS's new 50mm "quick adjuster" features a space saving integrated tongue. This ensures the adjuster sits directly and comfortably up on the driver's lap. The new "quick" adjuster guarantees users an even faster driver change, even compared to a normal TRS alloy adjuster. The pull down to tighten "quick" adjuster is perfect for driver changes and small cockpits where there is not enough space for an adjuster by the side of the seat and the floor of the car. Supplied with grab loops.
The lightweight 140 gram quick release buckle is of composite construction and is attached to the crutch strap on 6 point harnesses. Innovative features such as a securing tab for intercom cables on the shoulder strap and thumb loops on lower shoulder straps were all pioneered by TRS and are standard on all of their competition harnesses.
Key Features
Details of the key features of this harness are shown below. If need help deciding which harness is for you, please have a look at our TRS Harness Comparison Table.
- 6 snap hook fixing points
- FIA Homologation 8853:2016
- Suits saloon/GT cars, with short shoulder version also available for other cars (see dropdown above)
- Quick 'Pull Down' adjusters on lap straps
- Ideal for races where fast driver changes are required
- 50mm (2") shoulder straps
- 50mm (2") lap straps
- 50mm (2") crutch straps
- For use only with HANS/FHR device
- Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
- Wrap round shoulder fixing facility
- Alloy adjusters on shoulders
- Rotary quick release buckle
- Securing tab for intercom cables on the shoulder strap
- Thumb loop on lower shoulder straps
- 7/16" UNF eye bolts and instructions included
- Made in England
Options
- Colour - 9 colours are available, check the images to see the different options
- Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
- Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind
- Short Shoulder Version - Suitable for smaller cars with shoulder strap fixings directly behind the front seats. Please note that we don't recommend this option if you plan to wrap the shoulder straps around a roll bar.
Shoulder Straps
- Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
- Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
- The adjustment range of the lower shoulder strap is between 10cm and 40cm
- If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
- The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar
Bespoke Harness Options
Do you require bespoke options? CLICK HERE to download our Harness Spec Sheet. You can complete this and email it to us for a quote, or just give us a call.
Optional Extras
TRS Shoulder Pads
TRS Webbing Cutter
With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.
A pair of TRS Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.
Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.
CLICK HERE to download the fitting instructions for this TRS Harness.
This TRS Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.