A great value for money 50/75mm 6 point harness popular with oval track and rally kart drivers.
The simple and robust lever latch release buckle works well, even in very dirty environments. The harness features a "V" Crutch strap, steel adjusters and snap hook fixings as standard all round.
A variety of attachment points are available on request – please see the attached specification sheet detailing the options.
Please note that eyebolts are not included. Should you need eyebolts please order them separately.
As part of your pre-race checks, TRS recommend that you check the latch for a positive release prior to using the harness.
Key Features
Details of the key features of this harness are shown below. If need help deciding which harness is for you, please have a look at our TRS Harness Comparison Table.
- 6 snap hook fixing points
- SFI approved upon request
- 50mm (2") shoulder straps (upgrade to 75mm (3") straps using the dropdown box above)
- 50mm (2") lap straps (upgrade to 75mm (3") straps using the dropdown box above)
- 50mm (2") crutch straps
- Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
- Lever latch release mechanism
- Pull down to tighten lap
- 7/16" UNF eye bolts and instructions included
- Made in England
Options
- Adjuster Type - Steel as standard, or choose to upgrade to premium aluminium adjusters on the shoulders (superlite)
- Colour - 9 colours are available, check the images to see the different options
- Size - Select the 2" (50mm) or 3" (75mm) homologated version
- Eye Bolts - If you need eye bolts, select the length required
- Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
- Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind
- Short Shoulder Version - Suitable for smaller cars with shoulder strap fixings directly behind the front seats. Please note that we don't recommend this option if you plan to wrap the shoulder straps around a roll bar.
Adjuster Upgrades
You can upgrade the harnesses to the Superlite version. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps.
They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.
Standard Steel Adjusters
50mm (2") steel adjusters
75mm (3") steel adjusters
Premium Alloy Adjusters
50mm (2") alloy adjusters
75mm (3") alloy adjusters
Shoulder Straps
- Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
- Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
- The adjustment range of the lower shoulder strap is between 10cm and 40cm
- If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
- The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar
Optional Extras
TRS Shoulder Pads
TRS Webbing Cutter
With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.
A pair of TRS Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.
Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.
CLICK HERE to download the fitting instructions for this TRS Harness.
This TRS Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.