ST XTA Coilover Kit to fit Audi A3 (8V1, 8VK) (from 2012 onwards)

£1,396.00

Part Number: 1821080N
Quick Code: P439465

View delivery information
Click here to ask a question

ST

ST XTA Coilovers

The ST XTA Coilover is for those who demand the absolute best performance. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!

Performance driving in mind

ST XTA Coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable top-mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.

Easy lowering adjustment

Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be adjusted after the kit has been installed by simply turning the spring plate to make it higher or lower!

KW Engineering: Exclusive for ST suspension

The high-quality ST XTA Coilover is based on the twin-tube damping principle of low friction combined with pressure resistant damper housings. Manufactured directly at KW, a monoblock guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.

  • Latest damping technology for maximum longevity
  • Reduced system friction for effective damping adjustment
  • Individual lowering within the tested adjustment range
  • Front and rear axle thread adjustment (where possible)
  • Galvanized coilover struts with additional coating for an optimized corrosion protection
  • Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
  • Aluminium adjustable uniball top mounts (where possible)
  • Scaled camber adjustment (optionally also caster)
  • Externally adjustable damping
  • Please click on the notes to view the specific lowering range available for your vehicle

Lowering

This coilover kit will lower your vehicle 40 to 60mm at the front, and 30 to 55mm at the rear.


Compatible Vehicles

The part is compatible with the following versions of the Audi A3 (8V1, 8VK) (from 2012 onwards):

  • 1.0 TFSI - 1L Petrol 3cyl, 114hp, FWD Hatchback
  • 1.2 TFSI - 1.2L Petrol 4cyl, 103hp, FWD Hatchback
  • 1.2 TFSI - 1.2L Petrol 4cyl, 109hp, FWD Hatchback
  • 1.4 TFSI - 1.4L Petrol 4cyl, 121hp, FWD Hatchback
  • 1.4 TFSI - 1.4L Petrol 4cyl, 123hp, FWD Hatchback
  • 1.4 TFSI - 1.4L Petrol 4cyl, 138hp, FWD Hatchback
  • 1.4 TSI - 1.4L Petrol 4cyl, 148hp, FWD Hatchback
  • 1.5 TFSI - 1.5L Petrol 4cyl, 148hp, FWD Hatchback
  • 1.6 TDI - 1.6L Diesel 4cyl, 103hp, FWD Hatchback
  • 1.6 TDI - 1.6L Diesel 4cyl, 109hp, FWD Hatchback
  • 1.6 TDI - 1.6L Diesel 4cyl, 114hp, FWD Hatchback
  • 1.8 TFSI - 1.8L Petrol 4cyl, 177hp, FWD Hatchback
  • 2.0 TDI - 2L Diesel 4cyl, 109hp, FWD Hatchback
  • 2.0 TDI - 2L Diesel 4cyl, 134hp, FWD Hatchback
  • 2.0 TDI - 2L Diesel 4cyl, 141hp, FWD Hatchback
  • 2.0 TDI - 2L Diesel 4cyl, 148hp, FWD Hatchback
  • 2.0 TDI - 2L Diesel 4cyl, 181hp, FWD Hatchback
  • 2.0 TFSI - 2L Petrol 4cyl, 188hp, FWD Hatchback

An example VIN plate

Check Your VIN Plate

Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.

On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1100kg, and the rear axle load rating must be no more than 1070kg.

For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.


Documentation

The following documentation (fitting or adjustment instructions) is available for this product:


Tailor made for your car, this ST XTA Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.

Delivery:
Estimated by Tue 9th Apr 2024

Deliveries are made Monday to Friday and exclude weekends and public holidays.

We have an order cut-off time of 1PM on the days that we are open. Our estimated delivery date takes this into account.

If it is available, we will provide tracking information by email.


Select Your Location:
Delivery Cost:

UK Mainland excludes all islands and postcode areas IV, KW, PH, FK17-21, PA21-78

If you are ordering multiple items your total postage charge will be reduced. Please check your basket for the total cost.

  • Engines: 1.6 TDI, 1.2 TFSI, 1.4 TFSI, 1.4 TSI, 1.0 TFSI, 2.0 TFSI, 1.5 TFSI, 1.8 TFSI, 2.0 TDI
  • Only for vehicles with Multi-link (independent wheel suspension) rear axle
  • Front lowering: 40-60mm
  • Rear lowering: 30-55mm
  • Front Axle Load Rating: up to 1100kg
  • Rear Axle Load Rating: up to 1070kg
Carnoisseur Staff

Trading For Over 40 Years

  • Family owned and operated since 1979
  • Just ask our customers - we are rated EXCELLENT on Trustpilot
  • Safe, secure and easy ordering, online or by calling 01582 787377



Carnoisseur Price Match Promise

The Very Best Prices




Fitting Centre

Fitting Service