This KW DDC (Dymanic Damping Control) Coilover Kit has dampers that can be electronically adjusted from within the car. It is supplied with a controller (button on the dashboard) to select the desired damper setting.
With the new Dynamic Damping Control, KW has designed a new coilover suspension that uses a 3-way button to adjust the damping. The driver can choose between 3 modes:
Lowering
This coilover kit will lower your vehicle 40 to 65mm at the front, and 40 to 65mm at the rear.
Compatible Vehicles
The part is compatible with the following versions of the Audi A6 Avant (4G5, 4GD, C7) (from 2011 to 2018):
- 1.8 TFSI - 1.8L Petrol 4cyl, 188hp, FWD Estate
- 2.0 TDI - 2L Diesel 4cyl, 134hp, FWD Estate
- 2.0 TDI - 2L Diesel 4cyl, 148hp, FWD Estate
- 2.0 TDI - 2L Diesel 4cyl, 161hp, FWD Estate
- 2.0 TDI - 2L Diesel 4cyl, 174hp, FWD Estate
- 2.0 TDI - 2L Diesel 4cyl, 188hp, FWD Estate
- 2.0 TFSI - 2L Petrol 4cyl, 177hp, FWD Estate
- 2.0 TFSI - 2L Petrol 4cyl, 248hp, FWD Estate
- 2.8 FSI - 2.8L Petrol 6cyl, 201hp, FWD Estate
- 2.8 FSI quattro - 2.8L Petrol 6cyl, 217hp, 4WD Estate
Check Your VIN Plate
Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.
On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1170kg, and the rear axle load rating must be no more than 1425kg.
For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.
Documentation
The following documentation (fitting or adjustment instructions) is available for this product:
Tailor made for your car, this KW DDC - ECU Coilover Kit needs to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local Carnoisseur Fitting Centre to find out more.